BRIO Solid Plastic Laminate Partition

BRIO Solid Plastic Laminate Partition

-

English
4 Pages
Read
Download
Downloading requires you to have access to the YouScribe library
Learn all about the services we offer

Description

EURO Plastic Laminate Partition Section 10,161 For Toilet Stalls With Stainless Steel Hardware Page 1 of 4 Part 1: General 1.1 General Conditions .1 Clauses of General Conditions and Complimentary Conditions are an integral part of this section and are applied. 1.2 Related Work .1 Furring Section 06100 .2 Toilet accessories Section 10800 1.3 Samples .1 Submit a sample measuring [ 6 x 6 in. ] [150 x 150 mm.] showing the finish on both sides as well as two finished edges. .2 Submit a representative sample of each piece of hardware, including brackets, fasteners, and trim. 1.4 Shop Drawings .1 Submit shop drawings in accordance with Section 01340. .2 The drawings must clearly indicate details, plans, elevations, hardware, and installation details. 1.5 Maintenance Data .1 Provide instructions for the proper maintenance of plastic laminate which must be incorporated in the maintenance and user’s manual. 1.6 Protection .1 Protect finished laminated plastic surfaces during shipment and installation with the use of heavy kraft paper or by placing them in cardboard boxes. 1.7 Guarantee .1 Provide a written guarantee, signed and issued in the name of the owner stating that the laminated plastic work is guaranteed against warping and delamination for a period of one [1] year. The door hardware is guaranteed against all ...

Subjects

Informations

Published by
Reads 14
Language English
Report a problem
EURO Plastic Laminate Partition
Section 10,161
For Toilet Stalls
With Stainless Steel Hardware
Page 1 of 4
Part 1: General
1.1 General Conditions
.1
Clauses of General Conditions and Complimentary
Conditions are an integral part of this section and
are applied.
1.2 Related Work
.1
Furring
Section 06100
.2
Toilet accessories
Section 10800
1.3 Samples
.1
Submit a sample measuring [ 6 x 6 in. ]
[150 x 150 mm.] showing the finish on both sides
as well as two finished edges.
.2
Submit a representative sample of each piece of
hardware, including brackets, fasteners, and trim.
1.4 Shop Drawings
.1
Submit shop drawings in accordance with
Section 01340.
.2
The drawings must clearly indicate details, plans,
e
l
e
v
a
t
i
o
n
s
,
h
a
r
d
w
a
r
e, and installation details.
1.5 Maintenance Data
.1
Provide instructions for the proper maintenance of
plastic laminate which must be incorporated in the
maintenance and user’s manual.
1.6 Protection
.1
Protect finished laminated plastic surfaces during
shipment and installation with the use of heavy
kraft paper or by placing them in cardboard boxes.
1.7 Guarantee
.1
Provide a written guarantee, signed and issued in
the name of the owner stating that the laminated
plastic work is guaranteed against warping and
delamination for a period of one [1] year. The
door hardware is guaranteed against all defects in
workmanship for a period of two [2] years from
the date of signing the Certificate of Reception of
the work. The heavy-duty door latch is guaranteed
for life (it will be replaced free of charge with
t
h
e
r
e
t
u
r
n
o
f the defective part).
Part 2: Products
EURO Plastic Laminate Partition
Section 10,161
For Toilet Stalls
With Stainless Steel Hardware
Page 2 of 4
2.1 Materials
.1
European-style toilet partitions, floor mounted
overhead braced, EURO by EAD, distributed by
Sani-tech, Inc. (418) 836-0616.
.2
Plastic laminate: in conformity with
CAN3-A172-M79, category GP, of [1.6 mm.]
[1/16 in.] thickness and solid color or a pattern on
both surfaces, with a regular finish, color of the
architect’s choice from the manufacturer’s standard
selection.
.3
Particle board panels [25mm.] [1 in.] with a density
of [720 kg/m3] [45 lb/ft3], a hardness of [2225 N]
[500 lbs.],
.4
Decorative border in extruded PVC of [3 mm.]
[1/8 in.] in solid color or wood grain, color of the
architect’s choice from the manufacturer’s standard
selection. Permanently glued to the edge of the
panel with thermo-hardening adhesive.
2.2 Satin-Finish Stainless Steel Hardware
.1.A
Hinges for standard toilet compartments (3 hinges
per door), in heavy-duty 16-gauge stainless steel
type 304, finish #4, inward opening, invisible
from the outside. Mechanism in teflon. Model with
emergency access by lifting the door. EAD Product
200-010 or 200-011.
.1.B
Full-length piano hinges for handicapped-access
toilet compartments. In heavy-duty 16-gauge
stainless steel type 304, finish #4, outward opening,
invisible from outside. Model with emergency
access by lifting the door. EAD Product 211-010 or
211-011.
.2.A
Door latch for standard and handicapped
compartments in heavy-duty 11-gauge stainless
steel type 304, finish #4. Door latch with a handle
that can be grabbed with the hand equipped with
two intregated damping devices. EAD Products
#200-101, guaranteed for life.
EURO Plastic Laminate Partition
Section 10,161
For Toilet Stalls
With Stainless Steel Hardware
Page 3 of 4
.2.B
Heavy-duty door stop for outward opening doors.
EAD Product no. 2304617.
.3
Coat hook. Heavy-duty, in 11-gaugestainless steel
type 304, finish #4 in conformity with standard
5.2.1.c, CAN/CSA-B651-95. EAD Product
#200-233.
.4
Panel supports in stainless steel, type 304, finish #4.
Adjustable to follow the contours of the floor.
Heavy-duty with concealed mount. EAD Product
#551.
.5.A
Supports and full-length assemblage sections in
extruded anodized aluminum alloy 6063, tempering
#5 with clear anodizing, 10 microns. EAD Products
#172-000.
.5.B
Overhead brace in extruded anodized aluminum
alloy 6063, tempering #5 with clear anodizing, 10
microns, anti-theft with grip-resistant edges. EAD
Product #182-000.
.6
Pulls in D for handicapped-access toilet
compartments in 11-gauge stainless steel, type 304,
finish #4, in conformity with standards 4.2.6.1 and
5.2.2.d, and e, CAN/CSA-B651-95. EAD Product
#210-111.
.7
Mounting screws in stainless steel, type 410BH..
EAD Product #29312-034.
.8
Stainless steel sheet metal in conformity with
standard ASTM A167-82.
2.3 Fabrication
.1
Fabricate doors, supports, and partitions of
plastic laminate panels, [25mm.] [1 in.] thick
to the sizes indicated. Each of these elements
will have a finished contour in PVC and will
be mounted [100 mm.] [4 in.] from the floor.
The doors and panels will be [1828 mm.] [72 in.] in
height and will be mounted [100 mm.] [4 in.] from
the floor to provide maximum privacy. The only
points of contact with the floor will be the stainless
steel footings.
EURO Plastic Laminate Partition
Section 10,161
For Toilet Stalls
With Stainless Steel Hardware
Page 4 of 4
Part 3:Installation
3.1 Partition braces
.1
With the aid of adjustable stainless steel supports,
with adjustable
fix the partitions to the floor perpendicular and
levelers
square;brace them tightly.
3.2 Cleaning
.1
At the completion of the installation, remove all
of the protective elements, clean finished surfaces
so that they are free of blemishes or spots.
.2
Polish the metallic parts and replace those which
are defective or damaged.
End of section